Important precautions for battery tricycles
Release time:
2021-07-11
Important precautions for mechanical engineering vehicles:_x000D_ _x000D_ 1. When the vehicle starts forward and reverses, it is strictly forbidden to use the fast gear._x000D_ _x000D_ 2. Be sure to use fast gear when going uphill, and reduce the use of slow gear when driving normally, and slow gear driving is easy to burn the motor.
Jinjiang Shenggong Machinery Mechanical Engineering Vehicle Important Precautions:
1. When the vehicle starts forward and reverses, it is strictly forbidden to use the fast gear.
2. Be sure to use fast gear when going uphill, and reduce the use of slow gear when driving normally, and slow gear driving is easy to burn the motor.
3. When repairing the charger or replacing the fuse, be sure to cut off the 220V power supply and prohibit live work.
4. When parking and charging, turn off the driving switch, turn off the key switch and pull out the key, pull up the hand brake to a reliable position, and apply hard objects to jam the tire if necessary.
5. When the voltage of the battery car is lower than 45V, and thevoltage of the five battery car is lower than 55V, the use should be stopped, and the battery is prohibited from losing power.
6. Avoid long-term overload and climb long slopes and steep slopes to prevent motor burnout.
7. When driving on uneven or steep roads, you should slow down as much as possible to prevent strong vibration and cause poor contact or damage to electrical devices.
8. Cargo models are not allowed to carry people, and the driver's seat is limited to one person, otherwise you will be responsible.
9. During the maintenance process, when the carriage is supported, be sure to use wooden rods or iron rods to support the carriage to avoid accidents.
10. During the charging process and at the end of charging, the open flame shall not be close to the battery, otherwise the battery will explode and cause fire, such as the battery near the open flame Accident responsibility is borne by yourself.
RELATED NEWS
Jinjiang Shenggong Machinery Co., Ltd
Address: Tonglin Village, Anhai Town, Jinjiang City, Quanzhou City, Fujian Province (Anhai Park, Jinjiang Key Base of Fujian Equipment Manufacturing Industry)